12-03-2017 04:23 PM
Having made no change that I am aware of to my MX 490, when I select the option for duplex printing in the dialog box, I have started getting the following popup message:
"Cannot communicate with the printer.
Turn Enable bi-directional support on in the printer's Properties dialog box."
And then the job prints only on one side.
I have looked all around, and I can't find any box to check for this. I'd sure appreciate some direction on how to do what it tells me.
02-01-2018 11:59 AM
Hello,
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.