01-09-2024 05:04 PM
I have a Canon Pixma IP8750 and it's been great.
Tonight my prints started to come out faded about half way down, the dark tones/blacks/dark greens fade into red/pink and sometimes orangey tones.
I have performed a nozzle check print and it came out fine.
I have carried out a deep clean multiple times.
All ink cartridges are full.
Black text prints perfectly.
Please help as this is driving me crazy!
01-09-2024 05:17 PM
I just wanted to add that I just did another print head alighnment print and it only printed black ink on the sheet.
There is no cyan on the nozzle check sheet that I have just printed.
01-09-2024 05:29 PM
After I run a deep clean, the cyan shows on the nozzle check sheet.
When I then print one of my images, it starts out great and fades about an inch into the print back to red/pink. The cyan nozzle must be getting clogged constantly but how can I resolve this even after running multiple deep clean cycles?
01-10-2024 08:53 AM
Thanks for joining the conversation, nayfeee! We appreciate the info, though we need to let you know that the PIXMA iP8750 is not supported by our team here at Canon USA since that printer isn't available in this country. If you live outside the United States, please click HERE and select your country to find support in your part of the world. Your fellow Community members are still welcome to offer their advice.
Thanks for choosing Canon!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.