Hi,My MG5500 has been working well for a couple of months. Now, when I try to scan on the platen I get the above mesage.I am not sure how to set the compter to do this as I didn't have to do it initially.Any assistance would be appreciated.
Hi my Canon ix6550 has started to stop printing in the middle of a job, what can I do? If I turn off the printer and turn it on again it will print but then it will do it again. Help please.
I recently upgraded to a new desktop and installed all the software for the MX512. The printer is connected to my LAN and prints perfectly, but one thing I cannot find a way to alter or update is on the display panel of the printer at the top is says...
How do I turn off the alert
I have been several months now, unable to scan anything. It always tells me either the usb cable is not connected, or the scanner is shut off. I followed ALL DIRECTIONS to connect this device -- I even bought a new cable, all to no avail. I have r...
Feeling frustrated. My printer has worked just fine. Suddenly today I went to change the yellow ink. When I turned around to put a new ink catridge in, the machine had gone completely off--- no lights, nothing. After unplugging and plugging the p...
When I copy a document the pages came out blank. Also, when I print an MS-Word document, the pages come out blank, however, if I print an HTML document from a website, the printer prints fine.
I want to make a recipe file on line using Microsoft Word and would like to scan some recipes i already have. Can this be done on the pixma MG7120? I have scanned a couple but not to Word and am unable to make any changes to the recipes.
HiI got a production computer with capture perfect 3.0Is there a version where the job settings are saved per computer and not per user?This is a problem when i am creating scanner jobs everybody on the computer should be able to use. TJ
Evening all, ive been struggling with this and after reading alot of the literature im still at a loss lol Ive ran out of ink on the main black cartidge (PGBK525) the larger one, however i have a full BK526 cardtridge. Im sure I have used this cartri...
I am having problems scanning on my MG4250. It gives the message Processing please wait momentarily and then nothing happens. I have scanned with the lid open and it seems the scanner does not move, however this works when you copy?
After filling the paper drawer and reinserting it, I continue to receive a message telling me the printer is out of paper.Whats' up?
I suppose the cost of repair would be foolish due to the age of this printer. Sad that I have 10 ink cartridges for this machine. I see from the discussions that this is a very common fault with little or no resolution. I will be shopping for a diffe...
every time we print something in color, it has an orange hue throughout.
Subject | Author | Posted |
---|---|---|
04-27-2024 06:37 PM | ||
04-27-2024 04:40 PM | ||
04-25-2024 07:00 PM | ||
04-25-2024 03:03 PM | ||
04-25-2024 05:02 AM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.