04-17-2024 09:59 AM
My treasured iP110 mini printer has started putting actual standing drops of wet black ink on my prints; drops of varying sizes up to 1/8 inch, that smear badly. Replacing with new oem Canon black cartridge PGI-35 did not help, so it is the printer rather than the cartridge. Any ideas? Thanks, Cecil.
04-20-2024 04:40 AM
It sounds like your iP110 printer might be experiencing a hardware issue. Try cleaning the printhead to see if that resolves the problem. If not, you may need to contact Canon support for further assistance.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.