Canon Community Canon Community
 


Reply
Occasional Contributor
Posts: 5
Registered: ‎03-21-2017

Firmware Version for Pixma Pro-100?

While looking for a newer version of the MacOS driver for the Pro-100, I noticed a recent firmware version with a file date of 9/10/17. My printer is approximately a year old and has version 2.001 but this recent file is version 1.100. Why does the most recent version have a lower number than the one I have from a year ago?

Product Expert
Posts: 1,570
Registered: ‎07-28-2014

Re: Firmware Version for Pixma Pro-100?

Hi dfuerpo,

 

Please double check the firmware version that is installed on your PIXMA PRO-100:

 

 1.  Turn the printer on and make sure paper is loaded into the sheet feeder, and not the Front Tray.

 

 2.  On your printer, press and hold the RESUME button until the printer light blinks white twice. When you release the button, the Nozzle Check pattern will be printed.

 

The firmware version installed on your PIXMA PRO-100 will be listed below the nozzle check pattern.

 

What version is installed?

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Occasional Contributor
Posts: 5
Registered: ‎03-21-2017

Re: Firmware Version for Pixma Pro-100?

When I follow your instructions I get a two page nozzle alignment test, but no version number is printed. If I print a nozzle check pattern from the printer utility, below it prints the following:

101-150 Pages

Ver. 2.001

 

I am missing something or doing this wrong?

Occasional Contributor
Posts: 5
Registered: ‎03-21-2017

Re: Firmware Version for Pixma Pro-100?

OK I tried again and released the resume button after only two light flashes. Same result as printing the nozzle check from the printer utility. i.e. Ver. 2.001

Esteemed Contributor
Posts: 4,765
Registered: ‎11-13-2012

Re: Firmware Version for Pixma Pro-100?

http://community.usa.canon.com/t5/Professional-Photo-Printers/Canon-Pixma-Pro-100-Firmware-Update/td...

John Hoffman
Conway, NH

1D X, Rebel T5i, Many lenses, Pixma PRO-100, MX472
Occasional Contributor
Posts: 5
Registered: ‎03-21-2017

Re: Firmware Version for Pixma Pro-100?

Thank you!

New Contributor
Posts: 1
Registered: ‎07-20-2017

Re: Firmware Version for Pixma Pro-100?

Thank you Patrick. You were right.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement