08-12-2023 06:40 PM
Whenever I take anything more than one picture on my R6 m2, the camera buffers for about 4 seconds for each picture before letting me see them. I’ve used a new battery, new V90 Lexar Proffesional SD card, and different lenses. The problem happens in both RAW and JPEG, and I’ve used all 3 types of shutters and the problem persists. Is there any way to fix this?
Solved! Go to Solution.
08-12-2023 06:45 PM
Do you have any lens corrections enabled? Some of those cause a delay to apply to the photo before saving to the card.
08-12-2023 06:45 PM
Do you have any lens corrections enabled? Some of those cause a delay to apply to the photo before saving to the card.
08-12-2023 07:31 PM
This seemed to have fix it, I had the aberration correction setting on high. Thanks for your help
08-12-2023 08:21 PM
You're welcome.
08-13-2023 02:36 AM
Also make sure that you have low level formatted the card in camera.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.