01-03-2024 01:49 PM
After updating to Mac Ventura, my MX490 wireless printer always displayed as offline. I've downloaded the current driver; restarted my computer and the printer; and finally removed the printer. All to know avail. What now?
BTW The printer works when connected via USB.
Solved! Go to Solution.
01-09-2024 09:17 AM
Hi,
To begin troubleshooting, please disable the IPV6 setting on your printer using the steps HERE. Then remove the printer from your Mac and add it back on.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
01-09-2024 09:17 AM
Hi,
To begin troubleshooting, please disable the IPV6 setting on your printer using the steps HERE. Then remove the printer from your Mac and add it back on.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
02-15-2024 05:03 PM
I have had the same problem with my Canon iP8720. I recently bought an Apple iMac m3 and can't connect wirelessly. Tried deleting and adding the printer and now it can't be found. Do I have to connect it via USB (buy a USBC to USB extender) to set up the wireless connection or is there another way? Appreciate your help.
- Ronni
01-10-2024 03:49 PM
Thanks x 100, ArthurJ. That seems to have fixed it.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.