02-20-2021 06:29 AM
Hi guys,
I have an Canon imageprograph pro-4000 for my own little company. I mainly print posters with it, using Professional Print & Layout version 1.00. However the software is quite glitchy (sometimes crashes, some files does not work etc). Do you know any other software from Canon or any other company that would work better? I must be able to see an layout of the print area, and place slots in different sizes on the layout area.
I have spoken to my local reseller and Canon Sweden, but haven't been able to get any help.
Thanks in advance,
Patric
Solved! Go to Solution.
02-20-2021 08:21 AM
Look into Qimage Ultimate by ddisoftware.com
02-20-2021 08:21 AM
Look into Qimage Ultimate by ddisoftware.com
02-20-2021 12:45 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.