08-15-2016 04:51 PM
I have a Cannon MX430 series printer. My router was changed and now when I try to print, I get error messages. I reset wireless lan setting on the printer but still unable to print. Any suggestions?
08-16-2016 09:17 AM
There are older threads that have encountered this same issue.
http://community.usa.canon.com/t5/Wireless-Networking/Set-up-wireless-on-MX430-printer/td-p/4915
You can find the support page for a MX432, where you download the instruction manual, by following the link below.
https://www.usa.canon.com/internet/portal/us/home/support/
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.