03-11-2017 10:08 AM
Wanted this printer to make 4x6s fine art prints on site at a wedding. Print issues abound! Prints are off-center when using 4x6 paper, smudged at the corners, too light when switching to borderless, borderless also ****shifts course in the printer*** so the last bit of the image is not aligned. See image.
Paper is Hahnemuhle Fine Art Photo Rag.
03-13-2017 03:49 PM
Hello.
The iP110 does not support Fine Art media. Fine Art paper should only be used with our higher end products such as our imagePROGRAF or PIXMA PRO-Series printers.
Try using standard glossy or matte photo paper to narrow down the cause of your issue.
If the issue occurs with other types of paper, troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.