12-01-2012 09:28 AM
Any one having problems with Eye Fi Pro 2x card and EOS 5D3? I get random Error 80... Camera is totally blocked, requiring removal of batteries for starting over again...
12-01-2012 11:17 PM
http://support.eye.fi/cameras/canon/eos_5d_mark_iii
Have you done that?
12-02-2012 04:51 AM
Thanks Peter.
All is perfectly configurated, the camera working properly, and the card, geotagging and transmitting WiFi. Until Error 80 appears, of course, every 50-100 shots, even if the card is not in use (while saving RAW in card 1) and the cameras gets blocked. Using another second card (no EyeFi) avoids the Error.
12-02-2012 06:25 AM
Have you low level format the card? I get some error on my Eye fi card together with Fujifilm X100 if I haven´t format it.
12-02-2012 08:12 AM
Yes, also did that :-((
I really think it is a software incompatibility issue.
I use the Eye-Fi without any problems with the Canon S100...
12-02-2012 08:08 PM
Then send a message to Eye fi.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.