08-31-2017 10:24 AM
Hi All.
I'm looking for a way to shoot in a lower (faster) frame rate than 24fps on my MkIII, is this at all possible? I'm going to be shooting an action sequence for a short film in a few weeks, and from what I read online it seems like shooting slightly faster than 24fps and playing it back makes it look more "acton-y" (for lack of a better term).
Any thoughts?
Thanks for any and all help!
08-31-2017 10:42 AM
There is an amazing thing called a manual. It looks like 60fps is as fast as you can go:
08-31-2017 11:17 AM
I want to go lower, or faster than 24fps - like 20fps for example, not higher/slower.
Go ahead and check your manual. It isn't in there.
08-31-2017 02:18 PM
If it is not too long, you can just shoot a bunch of individual frames and combine them into a movie. That might be too slow, though.
08-31-2017 04:52 PM
@liljohnderb wrote:
I want to go lower, or faster than 24fps - like 20fps for example, not higher/slower.
Go ahead and check your manual. It isn't in there.
It is possible with ML. Don't blame anyone later for what you decide to do to your own cam.
08-31-2017 02:46 PM
CAN SOMEONE TELL ME HOW TO MAKE A POST IN THIS FORUM. PLEASE.
I have spent about 30 minutes looking but do not see how.
Frustrated senior.
08-31-2017 02:52 PM
Hello, TGAF!
Welcome to the Canon Community Forums!
Under the FAQs link at the top of the page, you'll see a section called "Posting Messages."
You'll find a shortcut HERE.
We hope this helps!
09-01-2017 09:30 AM
@liljohnderb wrote:Hi All.
I'm looking for a way to shoot in a lower (faster) frame rate than 24fps on my MkIII, is this at all possible? I'm going to be shooting an action sequence for a short film in a few weeks, and from what I read online it seems like shooting slightly faster than 24fps and playing it back makes it look more "acton-y" (for lack of a better term).
Any thoughts?
Thanks for any and all help!
You can't lower the frame rate in post processing, by dropping frames?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.