11-27-2014 06:04 PM
I have a 24 - 105 USM lens on my Canon 5D
It now only works on 24 mm. On any other zoom setting, the mirror goes up but won't come back down until I switch the camera off.
The problem is connected to the fact that the depth of field preview button doesn't work either. Pressing it closes the iris, but it gets stuck and won't release.
Do not reply to this message unless 1) you have had experiance of this problem and 2) you can suggest what I might try myself for a simple fix.
Thanks.
11-29-2014 09:49 AM
"So my next step is to contact them." Yes.
12-05-2014 12:47 PM - edited 12-05-2014 12:47 PM
I took the lens in to a loczl rapir shop. He has done a few of these, so that gives me a bit of confidence.
It is the diaphragm and cable that need replacing
$370
12-05-2014 01:05 PM
Thanks for feedback. It could be a help to others.
12-05-2014 02:05 PM
"I have a 24 - 105 USM lens ..."
At $370 you are half way, or over, to the cost of a new lens. Not saying just saying.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.