07-11-2014 04:56 AM
I have a Selphy CP910 and the only way that i can get it to print wirelessly in Win 7 is to disable my Windows firewall and Windows Defender.
What specific ports do I have to allow through on the firewall to all wireless printing without totally disabling the firewall?
07-29-2014 10:50 AM
Hi rpavich,
The SELPHY CP910 uses the following ports:
80, 9100 and 8611
Allowing these through your firewall should allow you to print without disabling it.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
07-29-2014 10:54 AM
Thanks very much!
07-29-2014 11:02 AM
you are welcome
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.