Connect with #TeamCanon experts, fans, and community members to ask questions, share knowledge, and connect with others.
Canon MG3620 ink cartridges do not come with snap-on protecters for transporting/storing. Is there a removable tape I can buy similar to the orange tape that the printer came with or?
After reading everything i can online i cant figure out how to access the disc area. more confusingly i don’t even know if i have a disc and i’m trying to print over bluetooth. when i think i’ve fixed error 1850 (push in tray and pull out all purpose...
I work in a school district that has all canon printers. There are only two school buildings and maybe a total of 89 printers in total. The printer models vary but are primarily LBP1238 and LBP1127C. In one of the locations, there are issues when use...
300 LiDE scanner common fault with no fix - Is it something Canon should/could address?I've used my scanner probably half a dozen times without issue - it's a great unit but I needed it last week and got the attached error message. I checked on vario...
Guys, can someone give a help?I have a canon t6, but I can't connect to the EOS UTILITY. The pc recognizes, but the program does not.I've already disabled Wi-Fi, I've already done everything that is yt's tutorial and nothing works. Is it the program?...
I cannot comment my Canon Pixma G7020 to my MS Surface Pro 9 running Windows 11 andProcessor: Microsoft SQ3 3.0 GHz processorSystem type: 64-bit OS ARM-based processorWhen I run the set up software, I get a message stating that device cannot connect...
Hi I am borrowing a EOS 400D for a while from a friend. It came with a 8GB CF card but i tried putting in a 32GB which increased the photo capacity by 4x if formatted on my computer. A 128 GB increased that by 4x again giving a total of 6370 Raw + L....
I love this camera for backyard birding and travel. I'm getting too old to travel with a heavy lens. That said, I dropped mine from a height of about 1 foot, into about an inch of water, retrieved it immediately and dried it off. It wouldn't turn off...
I have been using this lens with my 6D for years (admittedly not regularly - only when I travel), but have recently noticed that things get blurry (moreso toward the outer edges of the image) at 200mm with lower apertures. I can already see the blur ...
Bought a Rebel T7 used for astrophotography and so I've been using it solely with manual focus. Just started playing around with some daytime shots and am finding that I can't for the life of me get a clear AF shot with this lens. I went out this aft...
Hey guys, soo no idea about cameras, got my daughter a Canon eos 4000d for Christmas and it will not show the image you are trying to take a pic of , just shows the info for the setting your on then after the picture is taken it will show you your p...
Is there anyplace that I can get the latest firmware for EOS Rebel xs? I know its not supported anymore by canon, but I thought someone might have a copy . Thanks,
It's officially #NationalParkWeek! Together with our friends at Yellowstone Forever, we're kicking off the festivities with a sweepstakes that you can enter for a chance to win one of five prize packs
I have been using this scanner for some time and its very good.Today I have suddenly been getting an error messeage that reads: Release locking switch. detach USB cable and reconnectScanner will be closed.Code 2,179,12 I have tried all this to no ava...
FYI- not urgent - since I have other means to stream thru Zoom (C100 mk ii with HDMI-USB adaptor, 5D mk iv directly thru USB-A).Just upgraded to Sonoma 14.4 and installed the EOS WCU 2.1.18.The list of supported cameras for WCUPro 2 shows R5 but not ...
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Subject | Author |
---|---|
User | Likes Count |
---|---|
56 | |
24 | |
22 | |
21 | |
19 |
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.