Community Activity
MF656Cdw Copy Quality looks better than Scanned file. Settings in MF Scan to replicate quality?
Printer All-In-One: MF656CdwWindows 10 scanning with Canon MF Scan UtilityIssue: When doing a Copy (color) of a two-sided document directly placed onto the flat bed, the one-sided printed copy looks great and basically identical. Although a minor inc...
Problems with the New firmware 2.0 in canon R5
I just updated my canon R5 firmware 2.0 and the wheel I have on top to set up the diaphragm opening (f) doesn´t work properly and skip some positions and it doesn´t move the parameter at all. If I move for example 4 positions in the wheel maybe chang...
Modal3000.com Situs Mpo Modal3000 Deposit Slot Minimal 3000 Tanpa Potongan Pulsa
modal3000.comModal3000.com adalah situs mpo modal3000 play deposit slot minimal 3000 tanpa potongan yang dapat anda mainkan melalui deposit pakai pulsa xl dan telkomsel serta e-wallet dana, ovo, gopay, linkaja, sakuku, shopee pay, barcode qris dan ju...
Resolved! USA spec cameras & Euro spec flashes/triggers
Hi there….I have just bought a used Canon 7Dii from eBay from the USA, will this camera work with my Euro (UK & Bulgarian) flashguns (x3 ex580ii) and with an assortment of Pocket Wizard triggers?*** my concern is with the frequencies ***I have a lot ...
Resolved! 7Dii Cable accessory kit & battery needed!
Hi Folks,Update:- 7Dii with battery grip just arrived (Used)However, the Canon Box only included the battery charger and a single interface cable. Yes, original 2xCDs manual & other stuff included. Honestly, all in remarkable condition.So, where and ...
imageCLASS MF731C Looking for advanced menu of options
Almost six years ago, I was able to get to this menu and goof with the margins -- something that even Canon Support didn't think was actually possible at the time, btw. Six years later ... I don't know how I found this menu -- can't find it when tryi...
Scan utility for MX922
Hello, Where can I find the scan utility for this printer? I instelled the Quick Menu but teh Sacn area is empty.TIALee
Canon R6 Keeps Changing Itself to Auto ISO
I recently upgraded one camera from the Canon 5D Mark IV to an R6. I have noticed that during the reception while I'm using my Flashpoint (Godox) AD-200 strobes that my camera will not stay on manual ISO. After a few shots, the R6 keeps switching its...
canon rebel t7 and the canon zoo, lens ef 75-300
for some reason with this lens my camera keeps telling my the contaact len err code one is it beacue this lens isnt compatable with my rebel t7
PIXMA TR8620 won't scan
Greetings all, I have a Pixmia TR8620, I can print via wifi no problem however this morning I went to open the scanner and I got a message : Failed to open connection to the device (-21345). anybody know what that means?TIA
XF605 Is remote camera control application supported for camera access point connection?
I see how to set it up when there is a wifi connection. Will the app work for a single camera (XF605 in my case) using the camcorder's wifi direct access point connection?
XF605 Browser Remote on a Windows tablet - no slow zoom
Hi. After quite a bit of work, a MS Surface is running the browser remote webpage.It looks good except the most important feature - to avoid camera shake while zooming under magnification. Slow zoom has these < >. They work on Android Firefox nice...
Help choosing lens.. Worth selling the RF 14-35 f4 and 24-105 f/4 for the new 24-105 f2.8?
HelloI am a newbie and really got into wildlife photography the past two years.. I am planning my first safari next year and often to to Montana and British Columbia to take photos.. I currently own an R5 and R6 and 3 lenses.. The RF 14-35 F4, RF 24-...
TS8260 not connecting to changed internet provider
hi. We have changed internet providers and my TS8260 didnt ask for a password so wont connect to the internet, It shows that the new provider is there but cannot connect without password. How do i get it to work?
imageCLASS MF264dw II Error e805-0001
I get error after printer one page I get this error e805-0001 and it says to power off . Power off does not help. I don't see this code in the manual any idea on a cause or fix. Thanks.
