I have been using Canon HF-G40 camcorders to make videos of concerts and stage shows for some time, with a Canon HM100 microphone attached. I have now upgraded to HF-G70’s, which won’t take that microphone. I have therefore bought an HM-E100 micropho...
Hi -- I'm looking for an HDMI capture card that will handle 1920 x 1080 interlaced. Does anyone know if such a beast exists?
Hello...I connected a Deity TC-1 to the timecode in and the timecode changed.The problem is that the timecode on the camera screen is 3-8 frames behind the generator.Anyone have ideas as to why?Thanks...JJ
Hey all, since batteries can be quite an expense, I thought people might be interested in my experience with Hahnel's alternatives to the BP-A30 battery (C70, C300, etc.).I've had one Canon BP-A30 and two Hahnel HL-A30s, and I've been using them, pre...
I am trying to use the Manfrotto RC Pan Bar LANC Remote Control (MVR901EPLA) with the XF605, but the Iris + and - buttons do not work. I have two of these and neither works, so it is a compatibility problem. Are any steps being taken to fix this p...
Is anyone aware if there are "internal" CFE card readers available to fit into desktop PCs (i.e. on a 3.5 or 5.25in panel); preferably with a SATA connection? There is only one internal reader (Startech) that even has SC UHS-ii, & that uses a USB3.1 ...
So Canon added a USB-C port on the C400 that allows a video signal to be transmitted via the port. But there are currently 0 accessories available for this port outside of the built-in Canon LCD that comes with the camera. Where are all the C400 USB-...
we have the canon rc ip1000 and have paid for the auto tracking. one issue we have is when the auto tracking loses the subject it zooms all the way out. can we adjust this or stop it from happening?
Hi everyone,I lost my screws in a few apartment moves, does Canon carry or sell these screws for the Canon XA11/XA15? Saw some on ebay but was wondering if Canon sells them directly. Could try B&H if nothing else right?
I recently bought the item listed above on Ebay but my computer only has USB ports, not Firewire. Is there a cord that runs from the camera to a USB port - or some kind of adaptor - and, if so, could someone name the exact thing I should be looking f...
Hey!I just wanted to ask if anyone has experienced a similar issue and found a solution to this before I assume the mini HDMI port on my camera is broken (as it was working just a couple of days ago when I tested it last).Suddenly when I plug in my F...
I made a battery grip for the R5C using the canon BP-A 30 batteries. Now I have 8k 60p no limitations, and battery anxiety is also nonexistent now . Also getting about 2 1/2 hours of use. Thought I would share this because if I can make this you can ...
Hello; I have a Canon Vixia HF R800 video camera which I have had for several years but haven't used. I recently charged-up the battery and shot some video, but do not have the IFC-300PCU/s USB cable that came with the camera. The original box is p...
I'm going away for 10 days without access to wall power and taking a decent powerbank 100W output etc.I can recharge that through USB access in the car I'm going to be in slowly. But I'm wondering if anyone knows of a way to keep the BP-A's charged t...
So I have a Canon Vixia HF R800 camcorder. I have two current batteries which work fine...but I wanted 2 more as additional back-up. Just in case. So I bought the BM Premium 2 BP-727 batteries (which says works for canon video cameras like the one I ...
