06-06-2023 08:01 PM - last edited on 06-06-2023 08:03 PM by Tiffany
Hello,
I had reassurances that my new scanner would have proper TWAIN drivers to work with my new iMac running MacOS12. Nothing happens when I plug the printer in and I've downloaded several times the driver you have on your support page. What am I doing wrong?
Scott Bodyfelt
06-13-2023 02:43 PM
Hi,
If the scanner was connected before you drivers were installed, please remove the drivers/software, disconnect the scanner and restart your Mac.
Once that is done, reinstall the driver and CaptureOnTouch scanning program first and then reconnect the usb cable and open CaptureOnTouch and try to scan.
If the issue persists, it is recommended that you call our Enterprise & Desktop Solutions Divisions at 1-800-423-2366 Monday-Friday 9:00 am to 8:00 pm ET, excluding holidays.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.