I've had my R5C for less than 4 months and my micro HDMI port is no longer sending signal to my monitor/s. There are zero signs of damage to the connector. I even looked at it under a loupe. No bent pins or anything. USB-C above it works fine but...
HiConcerns: Canon C200 proper exposure in RAW with WFMSome DOPs like Rubidium say: expose an 18% gray card at 42IRE when preset at C-log3 because this is what the canon papers recommend for C-Log2 and since RAW is recorded in C-Log2 in this camera...
I have two of this camera that I use at the same time and I really need to make one have a different file prefix than the other so I can save the videos to the same folder. The entire 4th page of the "Recording Setup" menu is grayed out and un-select...
I've been in touch with Canon Support and before I submit a warranty repair request, I thought I'd ask here.I purchased a new XA60 camcorder and wanted to use my XA11 as a spare.With the new XA60, auto white balance, and white balance set by zooming ...
Clog2 correct exposure puts middle grey at 407/39.8%. the canon default clog2 to rec709 lut still puts middle grey at 407/39.8%, which makes the image look dark. if I move middle grey to 512/50%, the image looks too bright and washed out. so what is ...
I cannot for the life of me figure out how to bring the box back up. I used a Xeen 35mm EF with the rf adapter for a shoot, then when I switched back to a 24-105mm RF lens, the focus box was gone. I've tried to change a million settings and cannot fi...
Hi everyone,I just bought Canon VB-M46 one month ago. Thankfully, everything functioned smoothly. However, when I want to use the camera with my Python app by OpenCV library, I met one major problem regarding connection. Here is the detail:- I want t...
Could someone point me in the right direction to find a user manual. I have been all over the site which seems to just keep sending me is a loop or rabbit hole. Getting info on broadcast lenses is like getting info out of the government.Yes the produ...
We have manually setup an IPV4 address on the camera and additionally disabled IPV6. All computers and cameras are on the same subnet. We can ping the IPV4 ip address just fine. When trying to access the camera via the IPV4 IP address in a web browse...
I am trying to use my XA50 without the top handle and plug a mini shotgun mic with an 1/8 phono plug into the mic IN jack by the lens. I want the top handle off to reduce the camera profile for my B-roll camera, but have a safety audio source by usin...
Hi all - I'm looking to buy an external monitor that is compatible with my Canon C300 MIII and would love your advice. For those who have a Canon C300 MIII and an external monitor, which do you use? What should I be looking out for specification wise...
For the canon r5c I’m trying to shoot in 120 frames per second. i see the option to where you can shoot in 60 frames per second. Only other setting I see is slow and fast motion but I don’t really understand how that works
Looking for a community of owners operating the canon, PTZ camera line. CN 300 CN 500. The trace feature in the camera is very good when using cannons PTZ controller. I can only have one trace going at once. Can you have three Canon PTZ cameras runn...
Add the language to the camera Canon EOS R5 C Is it possible to add the language (Arabic) to this version of the cameras. Canon EOS R5 C Thank you
Hello, I purchased a used Canon EOS C100 mk1 camera and wanted to upgrade the firmware from 1.0.7 to the newest available firmware. but when I download the newest version and put it back in the camera the firmware button is grayed out, any way to get...
