cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EOS R5 C - Enabling Browser Remote / Network Help

aburno
Apprentice

Hello all.
New to the forum. I am excited to own the R5C but discovering a few frustrating quirks along the way, such as the WFT-r10b wireless transmitter requirement to allow the use of browser remote in video mode. Have any fellow R5C owners discovered a viable workaround or is the $999 accessory the cost of admission?

1 ACCEPTED SOLUTION

shadowsports
Elite

Greetings,

Visit the support portal, use the +feedback button and let Canon know about this.  

There were mine:

Cine Mode
Allow wi-fi connectivity in cine mode on the R5C using the existing onboard chipset.  (I am more interested in Camera Control than video transfer).  

Ability to disable (defeat) Channels 3+4 or the internal mic all together when a external microphone or Tascam Audio Adapter accessory is connected via the 3.5mm input or hot shoe.  Currently these have to be deleted in post.

(Firmware optimization) Optimize battery performance of LP-EN6H in cine mode. If the battery shows depleted in Cine mode, it should be identical or roughly the same if you switch to photo mode. As of now, (firmware 1.0.1.1) you still have 2 full bars remaining.

Feature Request
If possible, enable Dual Pixel AF in Cine Mode (this is currently available in photo mode)

Add the ability to take a full resolution still photo in Cine mode when using a video mode less than 8k.

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

View solution in original post

5 REPLIES 5

shadowsports
Elite

Greetings,

Visit the support portal, use the +feedback button and let Canon know about this.  

There were mine:

Cine Mode
Allow wi-fi connectivity in cine mode on the R5C using the existing onboard chipset.  (I am more interested in Camera Control than video transfer).  

Ability to disable (defeat) Channels 3+4 or the internal mic all together when a external microphone or Tascam Audio Adapter accessory is connected via the 3.5mm input or hot shoe.  Currently these have to be deleted in post.

(Firmware optimization) Optimize battery performance of LP-EN6H in cine mode. If the battery shows depleted in Cine mode, it should be identical or roughly the same if you switch to photo mode. As of now, (firmware 1.0.1.1) you still have 2 full bars remaining.

Feature Request
If possible, enable Dual Pixel AF in Cine Mode (this is currently available in photo mode)

Add the ability to take a full resolution still photo in Cine mode when using a video mode less than 8k.

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Thanks for the insights. I will leave feedback and hopefully amplify the awareness around this issue

AtticusLake
Rising Star

Scroll down this forum page a little and you'll see my post "R5C Video Remote Control" on the same subject.  AFAIK, that's the way it is for now.  I'm crossing my fingers and hoping that Canon fix this with a firmware update.

@AtticusLake

Hoping as well. 👍 

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Thanks for the quick response. I’m pretty disappointed, but hopeful that Canon will patch this in the future, as well.

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!