10-05-2023 12:14 AM
Hi, I'm printing 19 x 13 photos on a Pro 10 from a PC. It has worked very well for a long time until now. Now it prints beautifully and all of the sudden gets blurry, bad coloring, looks like a cartoon. See picture. Any ideas?
10-05-2023 05:42 AM
Before we can diagnose a printer problem I suggest two steps: 1. run a nozzle check and be sure it is producing correct results (run cleanings if required) and 2. run a roller cleaning using the Maintenance tab in the printer driver.
10-05-2023 10:57 AM
Thank you for your reply. I did run a nozzle check and it was clean. I'll run the roller check next. Thanks!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.