01-02-2023 06:04 PM
My printer is having trouble grabbing onto paper (5"x7" Canson Arches Aquarelle Rag 310gsm). The rubber wheel looks like it's covered in powder from the paper and it's not sticky enough to grab. Humidity here is a low 27%. Any suggestions?
Solved! Go to Solution.
01-02-2023 06:26 PM
Answered my own question. There's a magical "roller cleaning" function on the printer that worked!
01-02-2023 06:26 PM
Answered my own question. There's a magical "roller cleaning" function on the printer that worked!
01-04-2023 09:03 PM
Well, it worked for a while, but then it was back to failing to load the paper. I'm having to do a full wipe cleaning every 10 prints or so. Is this normal?
03/02/2023: New Firmware Updates Are Available:
EOS R7 - Version 1.3.0EOS R10 - Version 1.3.02/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.