cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA PRO-200 How to print custom sizes

bonitanetzel
Apprentice

I cannot find a way to custom print. I would like to use 12 x 16 and 18 x 24 frames. Help!

Why send me 13 x 19" paper with my Pixma Pr-200 printer purchase when I am going to waste so much of it ? Why make it sound like I have choices, when it only will print a set of predefined formats? I could not find a answer in the manual that would work with my Mac.

6 REPLIES 6

jrhoffman75
Legend

1. The Pro-200 is a 13” printer, so it is never going to print an 18x24 print. 
2. You can print a 12x16 image on 13x19 paper and trim. 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

You misunderstand.  I would like to print close to a 10 x 14" or a 12 x 18" print, a different aspect than Canon's set sizes, so I can use my existing mats and frames.  Is this impossible?

Hi,

Why doesn't my pro200 printer print panoramas?


@gas_canon200 wrote:

Hi,

Why doesn't my pro200 printer print panoramas?


Define your idea of a panorama. You can print up to 13"x39", which is a 3:1 panorama.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

I am using 13x38" paper.

There are several problems

1. It will only part of the image. Approximately 6 inches and then spits out the paper.

2. It prints parallel black lines approx. one inch from image top and bottom.

3. In the print dialogue box it show the print in alignment with the outline of the paper but prints the opposite. I've wasted paper and ink trying to get to work. It seems to me this should be a straight forward process.

Are you employ by Canon?

Thanks

jrhoffman75
Legend

12x18 is a perfect size image for printing on 13x19 paper - 1/2 inch margin all around.

The printer driver will allow custom sizes; it's explained in the manual for the printer.

MacMacWindowsWindows

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.