04-11-2024 01:54 PM - last edited on 04-11-2024 01:56 PM by Danny
I have a canon pixma pro-10. I have not printed any pictures in a while and I noted that the colors were off. I printed the Nozzle check pattern and noted that PC, PBK and C had no ink. I performed 2 print head cleanings and the PC came back somewhat but with streaks and PBK and C still showed no ink.
At this point I think the next step should be is to manually clean the print head. I have found several methods : lukewarm water, water with isopropanol (rubbing alcohol) and Windex.
Water seems safest to me and would have low risk of damaging the print head, but I would appreciate opinions from any of the community.
Thank you all for your help!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.