05-26-2023
03:52 PM
- last edited on
06-10-2023
09:02 AM
by
Danny
Hi,
I recently purchased a roll of adhesive backed fabric paper to print signs that will stick to walls and mirrors. I am getting extreme banding when printing dark images. I changed the print head and did some nozzle cleaning and I'm still getting the same issue. I'm thinking it may be the paper type that that is selected. Does anybody have experience with this type of media? I'd like to know which media type you're selecting. Thanks in advance!
05-27-2023 08:21 AM
Does the product manufacturer provide any recommendations for printing? Maybe on their website?
06-06-2023 06:33 PM
Unfortunately the adhesive fabric is not a Canon product, so they do not know what the setting should be.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.