05-31-2022 01:22 PM
I am hoping someone can help me out with printing from command line while also pushing a department ID at the same time. For instance, we have a Canon iR-ADV C5535 copier and I would like to be able to send the "lpr" command line printing to push a job, but also be able to specify the department ID as we use those here to track copier counts. We have the "allow anonymous department ID" turned off on purpose so people don't try to bypass that. I have tried using registry to push that info through the AccountMngTBL > DATA, but often come up with errors or the code doesn't get added correctly. Just wishing there was an easier way.
This was the doc I was using to see the command-line printing: https://oip.manual.canon/USRMA-0594-zz-DR-enUS/contents/dlu-cmd.html
Thanks!
Solved! Go to Solution.
05-31-2022 01:47 PM
Hi Christopheric1.
Welcome to the Canon Community Forums!
While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer and you're in the United States, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area.
If you're outside the USA, visit http://global.canon and choose your country or region from the map for local support.
We hope this helps!
05-31-2022 01:47 PM
Hi Christopheric1.
Welcome to the Canon Community Forums!
While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer and you're in the United States, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area.
If you're outside the USA, visit http://global.canon and choose your country or region from the map for local support.
We hope this helps!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.