12-15-2015 10:40 PM
Just need help the router instructions ask users to press the WPS buttons within 2 minutes of eachother but i cannot find the WPS button on this printer,
Printer canon mx452
router netgear 6220
thanks
12-17-2015 09:35 AM
Hello.
The WPS button is not on the printer. This button would be located on your router itself.
If your router does not have a clearly marked 'WPS' button, please try the following:
1. Press the Setup button on the printer.
2. Use the arrow keys to select Device Settings and press OK.
3. Select LAN Settings and press OK.
4. Choose Wireless LAN Setup and press OK.
5. If a WPS prompt appears, press the STOP button.
6. Select Standard Setup and press OK.
7. Select your Access Point and press OK. When entering the passphrase, use the Tone or Star (*) key to change character modes.
Once this has been done, you can perform the setup on your Windows or Mac OSX computer.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.