cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

i-SENSYS MF645Cx MF Scan Utility Error Message

orhanaydin
Apprentice

I am using Canon i-sensys MF645cx multi printer. I installed the printer and scanner drivers. The printer works but when I run "MF Scan Ultity" for the scanner I get the following error message: "a scanner driver supporting this software is not installed. install it and try again". I am using Windows 11 64bit operating system. The drivers I installed are "GPlus_PCL6_Driver_V250_32_64_00" and "winmfscanutilityv12002". can you please provide the solution to my problem?

6 REPLIES 6

dc607
Apprentice

Same thing happening to me on the MF634C   reinstalled updated drivers already, same thing.  Seems like a lot of people have had this problem.  It's impossible to duplex scan without it I hope they post a permanent fix.

kmetzger99
Apprentice

I am having the same problem.  Is there any solutions?  I can't scan anything.

dc607
Apprentice

I was able to solve mine by installing the latest driver from the Canon page.  It actually wouldn't install properly so I unchecked every driver option (print, fax, etc.) and left only the scanner box checked; I figured I could print to another configured printer with another working driver if need be, and then it successfully installed the scanner driver.  Then I was able to use the scanning utility software, and scan both sides of a single page.  The ability to do so should be on the device screen anyway I don't know why it isn't.   Using the software shouldn't be a requirement to duplex scan, it should be an option but with an ability to do it without any needed additional software.

kmetzger99
Apprentice

I will try it.  It is a remote office, so I have to remote in and do this when someone is there.  Thanks - hopefully this works.  I bought a new computer, so no choice in OS.  

MusicMaikel
Apprentice

Has anyone solved this issue? I'm having the same problem on a clients PC. They have a Canon i-Sensys MF742Cdw. I have installed the printer driver, but when installing the MF Scan Utility this isn't working. I'm getting the same error.

Greetings,


@MusicMaikelwrote:

Has anyone solved this issue? I'm having the same problem on a clients PC. They have a Canon i-Sensys MF742Cdw. I have installed the printer driver, but when installing the MF Scan Utility this isn't working. I'm getting the same error.


@MusicMaikel

This post is over a year old and is not related to your hardware.

Please start a new thread describing your issue. It should include the model of your device, the OS (version and build) you are using it with and any other information / observations you believe is relevant.

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.