02-20-2023 02:34 PM - last edited on 02-21-2023 10:16 AM by Danny
MX922 'not responding' Windows 10 after router change
internet provider forced me to change router. MX922 wireless is now 'not responding'. Have downloaded and reinstalled drivers. got no desktop icon for support application. MX922 says it has found the access point. Windows shows printer as installed and is default. Send test page to printer, just shows 'printing', and actuallly prints an XML file on another (Epson) wireless printer. I can't figure this one out.
Solved! Go to Solution.
02-28-2023 09:20 PM
Figured it out. Had to enter the PASSWORD , not the USER, on the printer.
02-28-2023 12:00 PM
Please click HERE for the steps to print the network settings page from your printer. Once the settings print, check to make sure the SSID matches what your computer is connected to.
Also, open a web browser on your computer, and in the address bar, please type the IP Address on the configuration page into the address bar. Next, tap Go or Enter to access the page.
Are you able to see the printer's remote interface?
02-28-2023 09:20 PM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.