cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon MX-922 Printer disconnected from my network and cannot reconnect

Shirleyannen
Apprentice

Hello, I printed documents on my MX-922 but the printer disconnected from my network after I printed a few pages. I tried to reconnect to my network via Standard Set-up (which has worked in the past) but it is not allowing me to enter the password after I select the network.  It automatically goes into connecting to the access point.  I have tried unplugging both the printer and my router; resetting the LAN settings; re-installing the LAN.  I get error messages (times out) each time.  Please advise. Thanks

3 REPLIES 3

Patrick
Product Expert
Product Expert

Hi Shirleyannen,

To connect your PIXMA MX922 to your wireless network, please turn using the WPS method.

More information regarding this can be found here:

https://support.usa.canon.com/kb/index?page=content&id=ART139014

 

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thanks for your reply.  I tried both standard and WPS methods and both failed. WPS constantly timed out even though I pressed the router's WPS button for 5 seconds.  I unplugged both the router and the printer for several minutes, several times.  

Hi Shirleyannen,

Who is the manufacturer of your router and what model number is your router?

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!