08-29-2016 04:32 PM
My SX50HS LED screen won;t come on. I've tried resetting using the display button but it still doesn't come on. The shutter appears to be working as a I can take pictures using the view finder. The LED does come on to review the photos at which time I can visually access all basic settings. However, the LED will not come on using the power, display or menu buttons, Any thoughts? Thank you
08-29-2016 04:46 PM
That is odd
I would try pressing the Display button till the viewfinder turns off then at that point hold the Display button down for at least 1 second
Also would try resetting to defaults thru the settings menu
And 1 last thing Id take out the battery and hold the power On switch in the On position for at least 30 seconds then replace the battery and try it again
I own 2 SX50HS's
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.