11-06-2021 07:32 AM
Hello,
i have an PowerShot SX620 HS with i want to connect with Camera Connect 2.8.10.20 on Android 12 (Google Pixel).
When i set up a new connection (Wifi) it works fine. But when i then disconnect and try to connect again, it fails.
The Wifi connection seems good, but Camera/Smartphone won't recognize the other device.
When I delete the connection and set it up new, it works fine again.
Anyone have a clue what might cause the problem?
11-07-2021 01:21 AM
Hi there,
Often this can be caused by the smartphone or tablet deprioritizing the camera's WiFi connection, since the camera's WiFi network doesn't have access to internet other devices will tend to switch to another internet-connected network assuming you want the most capable network over a specific connection. Creating a new connection is one way to bypass this but you may also look into your phone's WiFi settings to see if you can prioritize the camera connection as well.
11-07-2021 04:49 AM
Hi Mark,
thanks for your reply.
The WIFI connection is not the problem, i was aware of that issue.
When i initialize a new connection i have to confirm smartphone access by click "yes" on the camera.
But when I try to reconnect, the WIFI connection is established, but it just stops there.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.