01-21-2022 09:46 AM
I have a Canon ImageClass MF4880 printer and a piece of paper was jammed during printing. I followed the instruction to open the printer, but the paper was so tightly jammed that I could not remove it at all (pic1). After hard trying, the paper was badly torn (pic2). How do I fix the problem?
01-21-2022 11:01 AM - edited 01-21-2022 11:01 AM
Hi,
Its nearly impossible for us to tell you how to get jammed paper out of the device without being there.
See this KB article for assistance.
Canon Knowledge Base - If <Paper jam.> Appears
Please take your time and be gentle. Things can break if you pull and tug.
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
01-22-2022 04:16 PM - edited 01-22-2022 05:05 PM
Thank you. I have already checked but doesn't help. The paper is too tight to be removed.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.