the printer sucks up the black ink from the fat 220 cartridge, and leaves the slender 221 black ink cartridges alone. thus, i have several 221 cartridges sitting here (from color packs) and must continue to purchase the 220s. any insights?
i get a error code 0x80240017 when trying to download updates and printer will not print from internet mx922 printer-fax
My Pixma mx22 printer pulls 2 or more sheets of paper through when I print. I am using 22lb 8 1/2 by 11 plain white paper. No problems with this paper when using my Brother laser printer or my HP inkjet (the printer will eventually replace). I went i...
Does anybody knows how to solve this?I had installed the sftware before and averything was working fine, needed to install old canon camera (powershot A620) software but did not work properly.I decided to remove the printer's software and try to inst...
How do I scan double sided pages into a single PDF file?
Scan function in the toolbox stopped opening. Error message says to select a scanner. There is no dialog box or drop down, etc. to get the scan function open. Wireless printing still works.
Hi, I can't get this to work.
I replaced the toner and after that when printing it prints about 5 lines then misses 3 lines. i tried cleaning a few times and it still does it. i can't seem to find where the maintenance is to perform a alignment. Any suggestions.
My printer cartridge ran out of toner, I got more toner and went to print a document and the printer jammed stopping in the middle curling behind the cartridge and not going any further. I had assumed it was possible that the gray roller feeder was d...
Hi So my printer MX885 has difficulties printing MSOffice Word X for Mac: Specifically it does not print beyond lines that are formatted (e.g. automatic numbering, bullets). When I format manually (not using the formatting functions in Word) it prin...
I successfully got the IJ Scan Utility and the scan from the printer control panel to work in the administrators user, User1, but then when we switched to one of the other users on the machine, it doesn't work. I can print successfully from User2, bu...
I need help with this problem
We had a short power outage that has resulted in the red error light on my MF6100 flashing continously. I have tried to power the printer down without any success on clearing it, I have checked for error codes and found none. The power supply is plug...
my mf8580 printer is in a loop and only printing the number 8 endlessly how to I restore the factory default settings
I love this printer so far except for how sensitive it is scanning two sides. Many, many pages get jammed while feeding in to read the second side. Not all, but many. To me it should work better. Does anyone have any tips on how to make this work b...
| Subject | Author | Posted |
|---|---|---|
| 05-12-2025 10:55 AM | ||
| 05-09-2025 11:19 AM | ||
| 05-05-2025 06:45 PM | ||
| 05-05-2025 11:50 AM | ||
| 05-04-2025 08:17 AM |
New to the community? Here's some information to help you get acquainted:
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
