12-20-2023 05:08 PM
Hello, I have a ImageClass MF8280Cw that started returning a blank sheet of paper when selecting Copy and blank data on Scan, local or via connected PC. The reader bar still goes through the motion as it is at least attempting to perform a scan but the reader lamp does seem to be not as bright as it used to be.
I haven't found any troubleshooting information for this type failure or any suggestion of what needs to be replaced, the reader bar and lamp, the controller board, the ribbon cable that connects the reader, etc. Well, I should say other than reloading drivers, etc.Everything else on the printer still functions just as it should, directly and/or via computer.
Any help will be greatly appreciated,
Rick
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.