cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MF743cdw will not scan

autoandpetro
Apprentice

Purchased new Image Class MF743cdw all in one. Have two desktop win 10 computers I want to use it with. Neither computer has a wireless card in them. I have a Netgear R6400v2 router I would like to connect the printer to, then have each computer be able to use the print and scan functions when it is available. I have the Netgear Ready Share USB control center software loaded onto each computer. I have downloaded the driver package direct from Canon website and loaded each computer. Working with Canon support loading both computers we could not make either computer scan using the canon scan utility. We tried everything from reloading all drivers and programs, to direct connecting the MF743 to one computer with the same problem. We did reload drivers to be usb connected on the single computer test.

I said all that and need to add that I used a MF733cdw setup the exact same way with the Netgear R6400 and it worked till I woreout the 733. But the 743 will not communicate with either computer to scan. Both computers will print all day long but neither will communicate to scan.

1 ACCEPTED SOLUTION

Hector
Product Expert
Product Expert

Hello autoandpetro,

 

To use the scanner from both computers, you an connect the MF743 to your netgear router with an ethernet cable and that will put the printer on the network. Once connected to your router, you can activate the ethernet network connection using the steps provided in the link HERE.You will want to select the option for the wired lan connection.

 

Once the printer is connected via ethernet, the Windows 10 computers should be able to see the scanner through the network connection. You can download and reinstall the recommended drivers using the link provided HERE. The computers will connect to the MF743cdw using the network connection and would not need any USB sharing software.

 

If the setup does not find the scanner, you can turn off any security software currently running on the computer and you can try the install again.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

 

View solution in original post

2 REPLIES 2

Hector
Product Expert
Product Expert

Hello autoandpetro,

 

To use the scanner from both computers, you an connect the MF743 to your netgear router with an ethernet cable and that will put the printer on the network. Once connected to your router, you can activate the ethernet network connection using the steps provided in the link HERE.You will want to select the option for the wired lan connection.

 

Once the printer is connected via ethernet, the Windows 10 computers should be able to see the scanner through the network connection. You can download and reinstall the recommended drivers using the link provided HERE. The computers will connect to the MF743cdw using the network connection and would not need any USB sharing software.

 

If the setup does not find the scanner, you can turn off any security software currently running on the computer and you can try the install again.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

 

Solution works seamlessly. Thank you so much. 

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.