03-31-2023 10:44 AM
I have an MB2720. I am trying to print a return label with barcodes on it. Everything prints fine except for the barcodes, which are smudged and streaky. I've adjusted all the settings I can find, cleaned everything multiple times and even replaced the black print cartridge with no improvement.
Does anyone have any idea why this is happening?
04-12-2023 03:29 PM
Hello MJstatler,
The issue could be caused by the print settings used or the hardware. If the bar codes are blurry or smudged, you can try cleaning the printers encoder strip or turning on the option to prevent paper abrasion. If that does not resolve the issue, you can try switching the paper type from plain paper to another paper type to see if the print quality improves.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.