03-22-2024 08:16 AM
My LBP226dw printer is less than 3 months old. However suddenly it refuses to switch on. When I connect it to power and press any or all of the buttons the screen simply does not illuminate nor the engine make any sound. It is as if it were a brick.
Also for some reason the cartridge has become impossible to insert. It is as though some clip or physical setting has become toggled and now the cartridge simply won't insert. I have no idea why this would be the case or what the fix is. I've previously had no issue inserting the cartridge. Both of these issues manifested at exactly the same time.
I have a brick which cannot receive a cartridge. This is not good.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.