10-10-2023 09:17 PM
I am using an MF269dw and every time I print there are tiny "dropouts" where the printer doesn't print correctly. I've changed the cartridge to a new one (an authorized Canon cartridge). I tried the maintenance feature. None of these actions handle it. I've attached an example of the problem and circled the white "dropout" spots. Advice on how to remedy this is most appreciated.
Solved! Go to Solution.
10-24-2023 10:46 PM
10-24-2023 10:46 PM
This problem was entirely handled by replacing the drum cartridge.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.