05-12-2013 11:29 PM
Just bought Canon MX922 printer and having some trouble at setup with MP-101 paper fitting into cassette. Seems too wide to fit in. Am I having spatial orientation issues or is this something others have noted? Thanks
05-14-2013 09:40 PM
Hi gthag,
The cassette is designed specifically for plain paper. When using Matte or Glossy photo paper, please use the rear tray for pritning.
06-13-2013 10:19 AM
The set up instructions specify to load the MP-101 paper into the lower cassette. Neither the MP-101 paper nor plain paper seem to fit between the right/left paper guides in this cassette. ??
08-14-2017 03:27 PM
Where is "rear tray" on the MX922 for printing on matte photo paper?
08-14-2017 03:58 PM
Hi triplebrook,
Check out the following link for more information on the two paper trays and how to load different types of paper: http://Canon.us/rupr
Hope this helps!
08-26-2017 02:26 AM
I would not have been able to figure this out had I not found this forum; so first - thnak you all!
the instructions are not just inadequate, they are deliberately misleading; I agree with the poster who asked "why?" I'm sure the Canon company does not care but for what it's worth, there has to be a terribly incompetent legion of workers there, because this kind of incompetence does not come without some real effort at **bleep**ing things up
06-13-2013 10:36 AM
I just did the same thing - The "lower" cassette has two parts - see if you can pull another drawer out below the one you tried - the paper does fit in there... the upper one will just fit envelopes it seems. Stealthy lower drawer!
01-24-2014 12:49 AM
02-15-2016 05:29 PM
Thanks for this! My printer is in the bottom of a buffet cabinet, and I thought I had the lower tray out...but there was one lower yet.
Thanks again.
12-26-2016 02:02 PM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.