03-21-2023 02:46 PM - last edited on 03-22-2023 09:27 AM by Danny
I am having an issue where when I receive a fax it prints out a page saying that the receive job resulted in an error (The result is NG). I'm not sure if it is a network thing or if it's just that the fax machine is old. If someone could help that would be awesome.
03-28-2023 12:47 PM
NG will appear in a fax report if there is a problem with the call quality or if the fax transmission was dropped/interrupted. In this situation, you can try connecting the fax directly into the wall if you are using any splitters or try a new phone cord. You can also try turning off the error correction mode ECM RX (MENU>>FAX SETTINGS>>ECM RX) to see if it the faxes will come in.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.