cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Video on EOS Rebel T7i

verovilla77
Apprentice

Hi all, I looked on older posts but couldn't find this specific issue.  I've been doing some tests with videos on my camera.  I've been using a SDXC 64GB card. Each video last 29 minutes and I can play them on the camera, but when I try to transfer them to my PC, it shows each of them is 0 KB and I can't use them, they don't seem to have any data.  I used HD 1920x1080 setting.

 

I need some help to know whether I set the camera wrong or if this camera can't record videos this lenght. I really need some help.  Thanks!

1 ACCEPTED SOLUTION

kvbarkley
VIP

If you can play it back in the camera you can obviously record them.

 

How are you getting them to the PC?

 

Have you tried using a card reader to see what is exactly on the card?

View solution in original post

4 REPLIES 4

kvbarkley
VIP

If you can play it back in the camera you can obviously record them.

 

How are you getting them to the PC?

 

Have you tried using a card reader to see what is exactly on the card?

Thank you for your answer! You were right, When I tried to transfer the files directly from my camera to my PC using a USB Cable, the data showed for each video was 0KB.

 

pantallamemoriacamaracable.jpg

 

I then tried to transfer them directly from the SD using a SD reader, and the data for each video was correct and they worked correctly.

pantallamemoriacamara.jpg

Thank you again for your answer. 🙂

From the images/screenshots you posted It looks like your are having a communication time out on the larger files through the USB connection. That could be caused by using a USB 1.1 port or cable. You might try getting another cable or using a different port. Some older USB cables are not able to handle the higher transfer rates of the newer USB standards due to wires that are too thin.

 

So a suggestion to see if that is the issue, try using the cable that came with the camera (If your not all ready) and if that doesn't make a difference try a different port and also if your able to a different and newer computer (Should have upgrades USB ports to see if the port is the issue.)

On another thread here in the camcorder forum a user is having similar issues getting a file to download properly. In the Vixia HF R800 manual there is mention of SDXC cards being usable in the camcorder, but to make sure that your computer, OS and card reader are in fact SDXC compatible. Seems like the same concerns might likely apply to DSLRs as well.

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!