07-20-2020 06:59 PM - edited 07-20-2020 07:01 PM
Hello, all of a sudden my Canon RP touch screen has become unresponsive. I can't control the focus points (that feature is on in the menu), and I can't even tap on-screen buttons such as Q.
UNLESS, I flip the screen out and rotate it 180 degrees (still rear facing, but outside of the body). In that position, everything works fine. If I rotate it back (front-facing), or put it back into the body (rear-facing) it no longer works. Sounds to me like a connection problem in the screen articulation, but I figured I would check in case anybody has some bright ideas. Thanks.
Solved! Go to Solution.
07-22-2020 10:55 AM
Canon support says it's probably a loose connection between the LCD and the mainboard.
Sending it in for repair. $350, ouch!!
07-22-2020 10:55 AM
Canon support says it's probably a loose connection between the LCD and the mainboard.
Sending it in for repair. $350, ouch!!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.