cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

R5 tethering to Capture One always displays "no card in camera" in viewfinder while shooting

austinhargrave
Apprentice

While tethering with Capture one, the viewfinder or rear display always display it has no card in the camera, which is a little distracting while shooting. Does anyone else have this problem or know of a fix to stop it!?

 

 

13 REPLIES 13

Mark35mmF2
Product Expert
Product Expert

Hi there,

 

I'm not familiar with CaptureOne but if you have not done so already I would advise putting a memory card in the camera even if you are shooting directly to the computer. This might be something specific to do with the software which could be resolved through an update but to know if that is the case you would want to reach out to the developers of CaptureOne.

Capture One will not see the camera with any card in the camera! it has to be cardless to tether to C1. 

With a card in the camera, Capture One will not see/recognize a camera as connected (will not tether) The only way is to remove the card and capture images to a computer. I would love to shoot with an option of what was images were saved to where, jpegs v raws etc....but baby steps! Changing the "Release shutter without card" option in the menu does not fix the error message.  Photo of viewfinder when connected to Capture One!

 

Screen Shot 2022-02-18 at 4.37.34 PM.jpg

 

 

There is a decent workaround! Change the "VF display format" (which can be found on the 8th page of the first Menu ((the red camera icon menu - SHOOT8)) to Display 2. This gives the image that you see through THE VIEWFINDER a black frame and keeps the annoying "No card in camera" warning out of the image and less distracting.Canon R5 viewfinder with Display 2.jpg

 

Why are you responding to this problem if you aren't familiar with Capture One? This is definitely a canon firmware issue as it hasn't been a problem in any other canon camera. 

jrhoffman75
Legend

@austinhargrave wrote:

While tethering with Capture one, the viewfinder or rear display always display it has no card in the camera, which is a little distracting while shooting. Does anyone else have this problem or know of a fix to stop it!?

 

 


Sounds like it is a camera firmware message.

 

Not sure about the R5, but most Canon cameras have a Menu setting to allow shutter relase without card without a card.

 

Screenshot 2021-07-18 130337.jpg

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

travisphoto
Apprentice

I am experiencing this problem - very frustrating.

saraessex
Contributor

I really hate this too. I don't know who should fix this, Cap1 to allow shooting the card while tethered, or Canon, to allow us to remove this warning. So frustrating when trying to compose a shot.

There is a decent workaround! Change the "VF display format" (which can be found on the 8th page of the first Menu ((the red camera icon menu - SHOOT8)) to Display 2. This gives the image that you see through THE VIEWFINDER a black frame and keeps the annoying "No card in camera" warning out of the image and less distracting.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.