09-25-2023
05:35 PM
- last edited on
09-26-2023
09:49 AM
by
Danny
I made a custom setting for my entire set up. How do I know it's engaged when I turn the camera on? Or how do I go to it to engage it? It's not in the Q menu.
Thanks
Solved! Go to Solution.
09-25-2023 07:02 PM - edited 09-25-2023 07:08 PM
You chose it the same way that you select P M Av Tv C1 C2 C3 etc. mode selection.
09-25-2023 06:42 PM
If you created and saved (registered)a custom setting then it should show as a specific mode C1. If you didn't register it when you made all the settings verify that they are still as you want and register the custom setting now. Your camera manual will tell you how to do that.
09-25-2023 06:54 PM
I did save/register. C3. Where does it show up. It's not on my screen. And I can't find it among the 39 times it's mentioned. Looked a number of times.
Thanks
09-25-2023 07:02 PM - edited 09-25-2023 07:08 PM
09-25-2023 07:20 PM
Thank you. There it is and it now shows up on the record screen.
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.