10-01-2019 03:39 PM
Strangest thing. The EOS R that I have will occasionally (not often) get "stuck" with a really bright LCD screen. No amount of touching the back LCD or fiddling will pull the camera into proper exposure. The only thing that works is turning the camera off and then back on again.
Is this a known bug, or should I send this unit back?
10-01-2019 03:55 PM
After some testing, I see that this occasionally happens right after taking a lens cap off. When you turn on the camera before taking the lens cap off and then remove the lens cap, the camera LCD appears very bright as the camera meter adjusts exposure to the light. Sometimes, though, the exposure never gets adjusted down, and the LCD (and picture) remains intensely bright.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.