02-03-2024 10:12 AM - last edited on 02-03-2024 10:14 AM by Danny
My 700d and my wifes g3x have both had unwanted image quality changes. Both set on L and changed to various levels without us going into the menu screen. Anyone else had this?
Solved! Go to Solution.
02-04-2024 03:25 AM
I have worked out what happened. Hit Q button instead of button above it when doing backlit compensation then turned wheel and that altered image quality setting.
02-03-2024 10:53 AM
I’m not understanding what you mean by the cameras are set to L. Do you mean M?
02-03-2024 01:55 PM
You need to reset both cameras back to defaults settings.
02-04-2024 03:25 AM
I have worked out what happened. Hit Q button instead of button above it when doing backlit compensation then turned wheel and that altered image quality setting.
02-04-2024 09:40 AM - edited 02-04-2024 09:40 AM
Glad you found the problem. It would be good if you could mark your reply as a solution. This will help other users know that this issue has been solved. And that may also help other users in the future.
02-04-2024 10:18 AM
Will do. Sorry,new to site
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.