cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

RF 100-400mm F5.6-8 IS USM Free Floating when Vertical

JohnBaugh
Apprentice

I am new to photography and have recently purchased this lens. My question is when i have the casing held vertical, with little movement the lens inside seems to be free floating. When i turn the casing horizontal again the lens seems to line up perfectly. Should i be worried it was damaged in shipping or is this a normal feature because of the stabilization feature of the lens. Also, i have shot pics on this lens and everything seems fine. Thanks in advance,John

2 REPLIES 2

Hello, John.

Our RF 100-400mm rattles a bit when not attached to the camera and held vertically (pointed at the ceiling) and is fairly quiet when held horizontally. That is the "In Lens Image Stabilization" (IS or ILS). Image stabilization is achieved by a floating element controlled electronically by a microchip and electro-magnets, IIRC. Obviously, this is a simplistic explanation and it is a bit more complicated than that, but that is it in a nutshell and what you hear "floating" around in the lens. You can also hear the "In Body Image Stabilizer" (IBIS), which is a little more complicated, but works basically the same. Google "IBIS or IS diagrams" to get a better picture of what is going on in your system. It's pretty cool.

IS Unit in Lens.IS Unit in Lens.

Without actually hearing what you are, it's hard to say if everything is OK, but we have had ours for a couple of years now and it works perfectly with it's occasional rattles and noises.

On a side note, I have read that it is best to "park" the IS by turning it off a few seconds before shutting off the camera. I do this, but often forget. Doing this may extend the functionality of your lens.

Newton

JoeySnaps
Enthusiast

Yup. The bits floating around are the image stabilisation group of elements. When IS is functioning (with the camera turned on, take up the first pressure on the shutter button) these elements snap into position and don't wobble. But when the IS is not functioning (turn the camera off, for instance) they are free to float around on their spring mounting. It's disconcerting to hear, and if you peer into the front of many of Canon's lenses you can see them wobbling around. But perfectly normal and not a fault.

.
R6mkII, various lenses, speedlites. Also legacy Canons going back to T90 and even A1.
Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.