MG3620 power /trouble lamps flashing twice
The power and trouble lamp flash twice. I’ve checked for paper jam (none) and reset the ink cartridges. It still flashes.
The power and trouble lamp flash twice. I’ve checked for paper jam (none) and reset the ink cartridges. It still flashes.
This is my first Canon printer. Please help. Its Pixma G3020 mega tank.1) Printing is so slow. Specs says 5 ipm/ minute but this is more like 1ipm/4 minutes.2) I fiddled with the settings and changed the type of paper from Glossy to Plain Paper (whic...
Hello, I recently purchased a pixma TR8620a printer. I am trying to scan some documents. How do I set it so that I can scan multiple pages into a single pdf?Thanks,Mike
I would like to be able to use the platen to scan multiple pages into one document, using the operation panel, as I did for many years with my MX922. How is this done with the TR8620a?
MX922 from my MAC ventura 13.5.1 it condences the page and only prints in the upper left cornerWhen used as a air printer it is fine, or from Email it is fine. But any thing from my MAC is quarter sheet only. Yes the paper size is correct.
Power and Resume lights flashing. Cannot get cartridges to move to middle for access so I can clean ink pads.
ink cartridge carrier will not position to allow cartridge replacement
What does Error Code E58 mean on a TS3522 printer? I changed the black cartridge, now it will not copy, but it will print.
I have a Canon Pixma MX492 All-In-One. I have been trying for 2 days to scan some pictures and documents into my computer, but to no avail. I think I have tried just about everything (to scan and send to my computer, Windows11), but I continue to get...
I have a relatively new G7020 and as I did some print head cleaning and deep cleaning I would get fewer colors printing the nozzle check. When I opened the cover I noticed an air pocket in the ink line. How do I get rid of air pockets? I don't see...
I've had this printer for almost two months. All I did was take my laptop with me to another location and hook up to that printer. I've done this a lot before. I came home and no matter what I try, I can't print. I'm connected to wifi...my printe...
I'm trying to do regular printing of 8.5 x 11 paper, and for some reason, my Pixma MX922 consistently tells me my printer is out of paper. It wants to pull from the upper cassette instead of the lower, which is full of paper. I am on a 2023 MacBook, ...
When I try to print a document or form the page comes out with too much space at the header and cuts off the bottom of the form or document. I've tried an auto alignment and that hasn't fixed the problem. Is there anything else I can adjust or try? T...
Hi, My Pixma MG3620 no longer works and I'm going to recycle it. Does this machine have memory that might have data from prior scans? If so, is there a way to clear the memory? Thanks, CN
Subject | Author | Posted |
---|---|---|
04-23-2024 02:15 PM | ||
04-23-2024 08:22 AM | ||
04-22-2024 09:31 PM | ||
04-22-2024 07:23 PM | ||
04-22-2024 04:35 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.