Have error code 1007 on my MG5420. Have followed roller cleaning instructions, have removed paper tray numerous times, have checked paper guides, have shut down printer, no help. I have only printed 8.5x11 and have not changed any settings.Any sugg...
I recently installed Windows 10 Pro 64-bit on my Dell XPS 8900 desktop PC. When I tried to scan something I found that the scanner was not installed! Does the scanning function work with Windows 10? Any suggestions for what I need to do next? Thank y...
I have a Samsung Note 10+ and i was able to print at one time and now all of a suden i cannot print. message im getting is that "cannot communicate with the printer is enabled on your smartphone. do you want to disable"
I've read some earlier exchanges on this error. Since they're dated by almost a year I'd like to open a new thread. The error code display asks that the user power the printer down and then bring it back up. The error keeps repeating. The printhe...
I have demonstrated, changed cartridge, turned off and on. Still no black.What am I missing?
Our MX922 was previously connected directly between a phone jack and phone/answering machine combination. However, that phone line was associated with a home business which has closed, and the dedicated phone line for it has been disconnected. We wan...
I noticed that when my laptop is connected to my home network wirelessly, the laptop finds my Canon MX490 printer and I'm able to print to it and scan documents. However, whenever I connect the network cable to my laptop so that my laptop is now on w...
I just recently picked up the printer, and I have the 281 ink (blk/c/y/m), and when I start it up and it goes through the language selection then how to install the ink, I put in the 4 ink cartridges into the correct slots; it still keeps staying on...
I installed a new PIXMA TS5120 on a new Windows 10 laptop and I have a reoccurring error of 'Printer not responding' with document trapped in the print spooler. Same problem occurred with working Pixma TS3122 installed into the same new Windows 10 la...
Hi there, I made a clean install and downloaded fresh drivers and software for catalina Despite this th emac doesn't recognize the scan:- it doesn't recognize the scan using IJ scan utilities- it doesn't appear in solution menu (hopefully yes afterrw...
I recently installed the Pixma TR7550 along with the full set of drivers which include the IJ Scanning utility. The printer is connected to my Windows 7 machine by a USB cable and works fine but when I run the scanning utity I get this message: Cann...
Hi,I have a Pixma MG4150 which had a blank 6mm wide area the length of the paper.I have cleaned and deep cleaned and fitted new cartridges with no change.Could someone advise me please? I thought the print head being fitted to the cartridge would mak...
I started doing the setup online and saw that a bunch of picture and photo tools was going to come with the download, so I quickly cancelled it and went over to your Drivers page to see if I could get the lean-and-mean driver-only download. I found i...
I typically print black ink shipping labels, but lately my mx452 has been printing very light (can hardly read the writing) and printing a light blue/green color even when selecting black/white. I've had the printer several years and this is the firs...
I snet a print command to my MX892 and it went through all the commands but did not print, tried coping a document and this did not print. never happened before what's the problem.
| Subject | Author | Posted |
|---|---|---|
| 05-10-2024 07:49 AM | ||
| 05-09-2024 11:42 PM | ||
| 05-09-2024 11:20 PM | ||
| 05-09-2024 05:33 PM | ||
| 05-08-2024 05:36 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
